The National Candle Association(NCA) is the major trade association representing U.S. candle manufacturers and their suppliers.
The National Candle Association is widely recognized as the leading technical authority on candles and candle manufacturing.
Fire Safety  
National Candle Association
- Menu -NCA HomepageAbout CandlesAbout the NCACandles & the HomeFire SafetyIndustry StandardsElements of a Candle Science of Candles Membership InformationPublications & LinksMedia CenterMember Candle BrandsMembers Only

Fire Safety & Candles

Fire Safety & Candles There's a special beauty and tranquility to candles, but a lighted candle is also an open flame, and a potential fire hazard if not carefully monitored. In fact, accidental candle fires account for approximately four percent of all U.S. residential fires.

A study by the U.S. Consumer Product Safety Commission suggests that 85 percent of candle fires could be avoided if consumers followed three basic safety rules:

Never leave a burning candle unattended.

Never burn a candle on or near anything that might catch fire.

Keep candles out of the reach of children and pets.

The National Candle Association urges consumers to always follow the basic rules of fire safety when burning candles.

How to Burn a Candle Safely

How to Burn a Candle Safely: Before lightingBefore lighting

Trim the wick to ¼ inch each time before burning. Long or crooked wicks can cause uneven burning, dripping or flaring.

Always use a candleholder specifically designed for candle use. It should be heat resistant, sturdy, and large enough to contain any drips or melted wax.

Burn candles in a well-ventilated room.

Place the candleholder on a stable, heat-resistant surface.

Keep the wax pool clear of wick trimmings, matches and debris at all times.

Avoid drafts, vents or air currents. This will help prevent rapid or uneven burning, sooting, and excessive dripping.

Follow the manufacturer's recommendations on burn time and proper use.

How to Burn a Candle Safely: While burningWhile burning

Never touch or move a burning candle. Never move a votive or container candle when the wax is liquefied.

Don't burn a candle all the way down. For a margin of safety, discontinue burning a candle when 2 inches of wax remains (1/2 inch if in a container).

Extinguish a candle if the flame becomes too high or flickers repeatedly. Let the candle cool, trim the wick, and check for unwanted drafts before re-lighting.

Always keep the candle within your sight. If you are going to leave the room, be sure to first blow out all candles.

How to Burn a Candle Safely: When extinguishingWhen extinguishing

Use a candle snuffer to extinguish a candle. It's the safest way to prevent hot wax from splattering.

Never use water to extinguish a candle. Water can cause the hot wax to splatter and might break a glass container.

Make sure the candle is completely out and the wick ember is no longer glowing before leaving the room.

Don't touch or move the candle until it has completely cooled.

Click here for a complete list of candle safety rules.

Candle Fire Statistics

Nearly 10,000 residential fires are caused each year by the careless or inappropriate use of candles.

The National Candle Association urges consumers to always keep a burning candle within sight, keep candles away from anything combustible, and to keep candles out of the reach of children and pets.

 

Where Candle Fires Start *

Bedroom 35%
Living/Family Room/Den 16%
Bathroom 14%
Kitchen 11%

Items First Ignited *

Mattresses or Bedding 11%
Curtains/Blinds/Draperies 9%
Cabinetry 8%
Upholstered Furniture 6%

*Source: Home Candle Fires, Fire Analysis and Research Division, National Fire Protection Association, December 2012. Based on 2006-2010 annual averages

 

The National Candle Association Home :: About Candles :: About the NCA :: Candles & Home Decor :: Fire Safety
Industry Standards :: Elements of a Candle :: Membership Information
Media Center :: Contact NCA

Copyright © National Candle Association